Thoroughbred Rapid Charger

Thoroughbred

Rapid Charger

Rugged, reliable, real-time controller returns up to 30% recharge in less than 45 minutes; 100% recharge in only four hours! Fully-integrated microprocessor automatically terminates the charge cycle when battery voltage reaches the gassing point.

Product Information Sheet |  Product Warranty |  Product Manual

Features & Benefits

  • Fully integrated microprocessor control that automatically terminates the charge cycle when the battery voltage reaches the gassing point. Final charge period is determined by real time clock programming
  • Battery S.O.C. is validated prior to start of charge
  • Returns up to 30% recharge in less than 45 minutes and 80% recharge in less than three hours and 100% recharge in just over four hours
  • Low electrical noise ideal for use in plant settings where other electronic equipment and controls are in the immediate proximity
  • Interface jack for remote control and monitoring options
  • Compatible with industry accepted Data Acquisition devices
  • Automatic refresh charge every twenty four hours
  • Auto start with five second delay
  • Battery protection with override timers, wrong battery sensing and negative charge slope termination
  • Automatic shutdown for the following conditions:
    • 80% charge does not occur in six hours
    • Final charge is not reached six hours after 80% (gassing point)
    • Volts per cell are too high or too low
    • Charging current is too low
    • Battery cable is disconnected while charging
    • Maximum battery temperature reached (requires optional battery temperature sensor)
  • Advanced Ferroresonant Technology for Total Charge Control over the complete charging cycle
  • Four selectable 80% voltage settings
  • Four position Digital display for showing:
    • Charge current
    • Equalize in process
    • Fault diagnostics
  • Four LED indicators showing charge status including:
    • Charging
    • 80% Charged
    • Charge Complete
    • Fault Shutdown
  • LED test button
  • Charge data monitor button provides AH returned, Total charge time, Average volts per cell
  • Large green push button for manual start
  • Large red push button for manual shutdown
  • Manual and/or Automatic equalization can be set for weekends via real time clock programming
  • Front and rear door access allows easy configuration, troubleshooting and Service
  • Twelve foot long output cables for added flexibility
  • Output connectors SBX350 standard

Product Safety

  • UL Listed
  • UL Listed to Canadian safety standards

Optional Features

  • Battery electrolyte temperature sensor available
  • Remote Control Box available
  • Fungus protection available