Bill Wachtel, Sales Manager
Call Bill at 585.301.2201
Pat Bayers, Western Sales Manager
Call Pat at 630.853.5066
Tom Bell, Vice President of Business Development
Call Tom at 585.538.3334
Ken Selbig, Service Manager
Call Ken at 585.538.3333
Andrew Fleming, National Account Installation Coordinator
Call Andrew at 585.313.5111
For press and marketing queries email Jennifer Morgan

Palomino™

The perfect combination of performance and economy.

Features & Benefits

Microprocessor control for automatic dv/dt - di/dt termination
Automatic refresh charge every twenty-four hours
Charge time of eight hours or less on a normally discharged battery
Auto start with five second delay
Battery protection with override timers, wrong battery sensing and negative charge slope termination
Automatic shutdown for the following conditions
80% charge does not occur in nine hours or;
- Final charge is not reached six hours after 80% (gassing point)
- Volts per cell are too high or too low
- Charging current is too low
- Battery cable is disconnected while charging
  CAUTION: DISCONNECTING THE BATIERY FROM THE CHARGER DURING THE CHARGE CYCLE WITHOUT MANUALLY STOPPING THE CHARGER CAN CAUSE DAMAGE TO BOTH OPERATORS AND EQUIPMENT AND VOID THE WARRANTY
Ferroresonant tapered charge for optimum battery and charger life
Selectable 80% voltage of 2.37 or 2.45 volts per cell
Three position Digital display for showing;
- Charge current
- Fault diagnostics
Four LED indicators showing charge status including:
- Charging
- 80% Charged
- Charge Complete
- Equalize in process
Red push button for manual shutdown
Manual jump start for over-discharged batteries
Manual and or Automatic equalization
Ten foot long output cables for added flexibility
Numerous Output connectors available as standard

Product Safety

Optional Features