• Industrial battery charger applications expertise.
• A North American distributor network.
• The most complete line of chargers.
• Unsurpassed customer service.
• The industry’s best warranties.

• Vern Fleming, President
  Call Vern at 585.538.3270
• Bill Wachtel, Sales Manager
  Call Bill at 585.301.2201
• Tom Bell, VP Operations
  Call Tom at 585.538.3334
• Ken Selbig, Service Manager
  Call Ken at 585.538.3333

Bronco

Silicon Controlled Rectifier(SCR)

Multi-Volt, Multi-Amp Hour programmable Silicon Controlled Rectifier (SCR) charger. Returns a fully depleted flooded, gel or VRLA battery to 100% charge in eight hours or less.

Product Information Sheet |  Product Warranty |  Product Manual

Features & Benefits

• Programmable voltage capability
• Programmable amp hour capability
• Fully controlled by microprocessor
• Programmable charge profiles designed for flooded, gel, and VRLA batteries, or custom defined profiles.
• Charge time of eight hours or less on a 100% discharged battery
• Battery temperature compensation with optional BIT
• Real time clock
• Three start modes:
  • Auto start with five second delay
  • Selectable delayed start
  • Push to start
• Programmable automatic refresh frequency (6 to 90 hours)
• Interface jack ready for remote control and monitoring options
• Battery protection with override timers, incorrect battery sensing and negative slope termination
• Cool-down time display after charge complete
• Automatic shutdown for the following conditions:
  • 80% does not occur in 9 hours
  • Battery voltage per cell is too high or too low
  • Charging current is too high or too low
  • Battery cable is disconnected during charging
  • Battery temperature fault (see options)
• Four digit alphanumeric digital display for indicating:
  • Start mode
  • Charge mode
  • Idle mode
  • Shutdown mode
• Four LED indicators indicating:
  • Charging
  • 80% charged
  • Charge complete
  • Fault shutdown
• Four control push buttons for setup, display, and control:
  • Review mode
  • Setup mode
  • Charging mode
• Monitor charge data during charge cycle or after charge complete
  • 10 cycles of charge data retained in memory
• Watering control signal (see options)
• Manual jump start for over discharged battery during battery testing mode
• Manual and automatic equalization
• AC power failure recovery
• Random restart after AC failure
• Non-volatile memory for all settings
• Multiple output connectors available as standard

Product Safety

• UL Listed
• UL Listed to Canadian safety standards

Optional Features

• BIT - Battery Information Transmitter
• BIT upgrade kit
• Remote Control Box
• Water valve kit